This is a smart pool salt chlorination cell with app control for easy maintenance.

• Bluetooth and WiFi connectivity for remote operation

• Easy setup with QR code scanning

• Compact design suitable for various pool sizes

Compatibility: Designed for pools up to 15K gallons and under! Replaces OE#: 520888 EC-520888 Notes:Check the salts 1,Normal Salinity: The normal salinity of a pool is between 2800-4500 PPM. 2,High Salinity: Salinity levels above 4500 PPM, high salinity levels increase the risk of corrosion and deterioration of pool equipment and environmental surfaces around the pool. 3,Low Salinity: With water salinity levels below 2800PPM, the IC15 will produce chlorine less efficiently. Adding salt is highly recommended. 4,Salt type: It is recommended to add table salt, soft water salt, industrial salt, etc. Do not apply mineral salt. Why can't I use Mineral Salt? Mineral salts are not easily broken down by the pool water and cannot be evenly broken down in all parts of the pool, thus reducing chlorine production. Why is table salt recommended? The powdered form is easily broken down by the pool water, resulting in better absorption and a more even distribution of salt. Common troubleshooting and recovery methods！ ●No flow 1. Determine whether the water flow direction is reversed. 2. Remove it from the pipe, power on the product normally, and choose not to enable WiFi. 3. Manually press the water flow switch and observe the status. 4. If "salt check" is displayed, it indicates that the water pump flow rate is too low. 5. If "no flow" is still displayed, it indicates that the water flow switch sensor is faulty. ●WiFi connection failure 1. Press and hold the less key for more than 5 seconds to reset the WiFi. 2. Reconfigure the network according to the configuration steps. 3. Make sure to send the correct WiFi name and password. 4. Ensure that the product has not been blacklisted. 5. If the connection still fails, it may be that the wifi signal strength at the location where the product is located is too low. ●Display Problems 1. If it shows normally during installation but turns white, flickers or snows after a period of useIf the display is normal during installation but abnormal phenomena such as white screen, flickering or snowflake screen occur after a period of use, as the normal operating temperature of the screen is between -4 ° F and 158 ° F (-20 ° C to 70 ° C), and the display becomes abnormal after overheating, after the entire machine is powered off, place the product in a cool and well-ventilated area. Once the temperature cools down, power on and it can be used normally. It is recommended that customers install the product in a cool and well-ventilated area.Or install a shield to avoid direct sunlight. ●SCG Is Off is displayed and key and APP adjustments are invalid. If the power supply voltage is too low, the product cannot work normally. Users need to check the power voltage supply. It can work normally after the voltage is restored. Product Specification Material: PE material Suitable for: 15,000 gallons pools Color Options: White Brand Image: Svipxoxo is a trusted brand in the pool, known for specific brand attributes such as innovation, reliability and customer satisfaction. With years of experience and a commitment to excellence, we provide high quality parts you can trust.